DISCLAIMER: These video presentations are not intended to be all-inclusive instructional videos nor offer advice on appliance repair. They merely illustrate the process. These videos take a lot for granted such as, but not limited to, safety around electrical devices, proper choice and use of hand tools, techniques to ensure personal safety, protection of property, fire safety, and more. By viewing. listening to, or watching this or any other video on the Hottop USA website you assume all responsibility and release Hottop USA and all its employees and contractors from any and all liability. If you do not accept these terms and/or your local laws prohibit such a release of liability, you may not watch or use the information in these videos.
To replace the panel:
Carefully replace the cables in their respective sockets. There are polarizing taps on each so they only go in one way, and they are three different sizes so cannot be confused.
On "K" machines, replace the thermocouple connector last. Use care as the conductors are solid-core and can be easily broken. Do not bend them more than absolutely necessary.
Start at the bottom by inserting the panel and aligning it with the opening. Then snap it in, starting along one side with the lower left-side tab and then the lower right-side tab. Continue up and snap the top center tab last.
Power the roaster, start an empty roast (no beans) and ensure proper ooperation uincluding the eject finction, verifying that the eject door has opened fully.