This kit will update the KN-8828 and the KN-8828D to KN-8828B-2K+ functionality.|
Includes everything as listed below:
- KN-8828B-2K+ Control Panel
- Two KN-8828B-2K+ K-thermocouples
- Updated Heating Element
- KN-8828B-2K+ Roast Chamber Rear Wall
- Left Side Panel for KN-8828B-2K+ control panel
- Compatible main circuit board
- USB cable
- Eject solenoid return spring
- Solenoid drip cover
- Two eject solenoid return spring seats (special cupped washers)
- Assorted replacement screws (not shown)
- The complete UK-100 "-2" kit to add full emergency functionality.
Purchasing this package saves you $50 over the cost of purchasing the items separately as well as the trouble of disassembling the roaster twice if you decide to add the "-2" function at a later date.
IMPORTANT: The early roasters which use this kit have either a small chaff tray or a large chaff tray (measured by volume). Please refer to THIS page on our website to identify which tray your roaster has. Be sure to mention that when purchasing or send us a separate e-mail and let us know which chaff tray you have.
IMPORTANT: For this and other items it is critical to know exactly what model you have. Please refer to our MODEL IDENTIFICATION WEBPAGE to be sure of the model for which you are ordering parts. Do not depend on printed model numbers on the machine itself.
The installation of this kit requires nearly complete disassembly of the roaster in order to replace the horizontal frame member shown in the photo. The roaster needs to be stripped to the frame and then the three main frame members disassembled. Before ordering be sure you are comfortable and sufficiently capable to complete this process.
We have a comprehensive guide to upgrades. It shows what upgrades are available for your machine as well as links to step-by-step installation instructions.
NOTE: Hottop USA only sells 120VAC 60Hz upgrade kits. For all other voltages you must e-mail the factory for direct sales or to find the nearest supplier to your region.